Durable Cold Formed Steel Profile for Structural Applications

The Hot dip Zinc Solar Support Bracket manufactured by Shixinda is made of Q235B and Q355B high-strength steel, strictly following the GB/T13912-2020 national standards. It is fully immersed in molten zinc liquid to form a metallurgical bonding protective layer. The coating is uniform and has no dead corners. It can protect the base material by relying on the sacrificial anode principle and effectively resist outdoor wind and rain, industrial atmospheric corrosion. It can stably adapt to the 25-year design lifespan of photovoltaic power stations and requires minimal maintenance in the later stage.

The Zinc Aluminum Magnesium Solar Mounting Bracket manufactured by Shixinda suppliers is made of steel with a ternary alloy coating formed by adding approximately 1.5% to 3% aluminum and magnesium in the hot-dip galvanizing solution.

Shixinda, as a professional manufacturer of photovoltaic brackets, mainly produces high-quality Hot dip Galvanized Solar Mounting Brackets. These are the mainstream preferred matching products for ground photovoltaic power stations. The brackets are composed of carbon steel base material, hot-dip galvanized protective layer, and matching fasteners. The material selection strictly follows national standards. The main load-bearing components are made of Q355B high-strength steel, while the secondary components are made of Q235B carbon steel. The wall thickness is suitable for various engineering requirements, and the mechanical performance is stable and compliant.

The Solar Mounting Bracket manufactured by Shixinda's suppliers is made of Q355B high-strength material. It is available in three mainstream materials: hot-dip galvanizing, zinc-aluminum-magnesium, and 6063-T5 aluminum alloy. The thickness of the galvanizing layer is ≥ 85 μm. The salt spray test of the zinc-aluminum-magnesium model can reach 1500 hours. It has outstanding adaptability to high-corrosion environments such as coastal and saline-alkali areas, with a design service life of 25 years, matching the lifecycle of photovoltaic modules. The product strictly follows national load standards and can withstand 12-level strong winds and high snow loads, meeting 8-degree seismic design standards. The structural safety redundancy is sufficient.

This Zinc Aluminum Magnesium Z Channel sold directly by Shixinda Factory is a new generation of ternary alloy anti-corrosion cold-bent steel roof truss. It differs from the traditional single hot-dip galvanizing profiles. It is made by rolling forming with S250GD, S350GD, and S550GD full series of high-strength steel substrates.

The Hot dip Galvanized Z Channel produced by Shixinda suppliers is a cold-formed anti-corrosion roof truss specifically for prefabricated steel structures. It is made from steel strips processed through a continuous cold bending one-piece forming process. The unique inclined flange Z-shaped cross-section design is its core structural feature. The entire product undergoes overall hot-dip galvanizing and passivation treatment upon leaving the factory. The surface layer of dense alloy zinc layer prevents water vapor, acid, and alkaline soil corrosion.