This Checkered Steel Plate, produced by Shixinda suppliers, refers to a metal sheet with raised patterns (rugged textures) on its surface. Through rolling or stamping processes, regular-shaped raised patterns such as rhombuses, ovals, and round ovals are formed on the base plate surface. It is mainly used for anti-slip, enhancing rigidity, and decoration.
The Checkered Steel Plate pattern structure of Shixinda effectively enhances the friction coefficient between the shoe sole, wheels and the surface. The standard test wet friction coefficient can reach above 0.6, compared with the smooth steel plate with a friction coefficient of only 0.2. In high-humidity and slippery working conditions such as ships and oil platforms, it can reduce more than 80% of slip accidents. The height of the pattern is the core control point of the anti-slip performance. Shixinda strictly follows national standards for production, with the pattern height not less than 20% of the base plate thickness: the flat bean-shaped pattern ≥ 0.6mm, the rhombic pattern ≥ 0.5mm, the round bean-shaped pattern ≥ 0.7mm. This ensures the effectiveness of anti-slip from the source.
2.Structural reinforcement
The raised patterns on the surface are equivalent to the strengthening ribs of the sheet. The overall stiffness of Shixinda's patterned plates is increased by 15% to 20%, with excellent anti-deformation performance, and stronger load-bearing capacity. Platforms and walkways are less likely to deform.
Durable and scratch-resistant, easy to maintain. The surface patterns can naturally cover surface scratches generated during use. The wear of Shixinda's Q235B carbon steel patterned plates is only 60% of that of ordinary flat plates. Daily operation and maintenance are simple, and the later maintenance cost is significantly reduced.
3.Weather-resistant and corrosion-resistant
It can provide stainless steel, aluminum alloy, and hot-dip galvanized multi-material patterned plates, suitable for long-term stable use in outdoor, humid, and corrosive working conditions, meeting the different project requirements for anti-corrosion and durability.
4.Aesthetically pleasing decoration
The pattern has a full and clear three-dimensional effect, balancing practicality and appearance. It can be widely used in decoration scenarios such as shopping malls, elevators, indoor and outdoor walls, etc., and can be used for both industrial and decorative purposes.
5.Low overall cost
The plates come with anti-slip functions, so there is no need for additional anti-slip coatings or treatments. This saves secondary processing costs and helps customers control the overall project cost.
Manufacturing Process
1. Hot Rolling One-Time Forming
Process Flow: Steel billet heated at 1100 - 1250℃ → descaling → rough rolling → finishing rolling (using special patterned rolls to press out raised patterns) → cooling → straightening → shearing / winding. Product Advantages: Single-sided raised pattern, flat backside, full and thick patterns; excellent metal high plasticity, mainly for 3 - 12mm medium-thick specifications, width ranging from 1000 - 2000mm; high production efficiency, price 15% - 40% lower than cold-rolled embossed products; the board surface has hot-rolled oxide layer, thickness tolerance of base plate approximately ±0.3 - 0.5mm, suitable for large-scale bulk purchase in industrial load-bearing projects.
2. Cold Rolling / Ambient Pressure Embossing
Process Flow: Cold-rolled thin plate / hot-rolled acid-washed plate as the base plate → ambient 100 - 300 ton equipment pattern rolls or molds for pressing → as needed, annealing to relieve stress → straightening and shearing. Product Advantages: Sharp and clear patterns, high dimensional accuracy, thickness tolerance ±0.1 - 0.2mm, board surface clean without oxide layer, outstanding decorative effect; mainly 0.8 - 3.0mm thin plates, higher cost, Shixinda can be customized as needed, mostly used for elevator interiors, decorative panels, light walkways, kitchen equipment.
3. Other Processes
Supports secondary stamping patterns on the back and front of the board, with a double concave-convex structure, high cost performance, is a common processing scheme for domestic general engineering; also supports laser engraving, can undertake customer exclusive customized pattern designs.
Construction sector (accounting for over 60% of the usage): stair treads, factory platform walkways, fire escape routes, equipment maintenance passages, outdoor stairs, balcony paving. Shixinda supplies stable products for a large number of infrastructure and factory projects.
Transportation: ship decks, high-speed rail platforms, airport bridges, pedestrian overpasses, truck bed floors, special vehicle footboards, container floors.
Special working environment: food and pharmaceutical kitchens preferentially choose Shixinda's 304/316L stainless steel round bean pattern plates, which are easy to clean and disinfect; outdoor humid environments choose hot-dip galvanized pattern plates; coastal environments with high chloride ion corrosion recommend upgrading to 316L stainless steel material.
Decoration sector: commercial complexes, shopping malls, elevator carriages, indoor and outdoor decoration walls.
If you have any enquiry about quotation or cooperation, please feel free to email us at yanglingling@shixindasteel.com or use the following inquiry form.Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy