Shixinda has been supplying steel from Daqiuzhuang, Tianjin, for over eight years. As a manufacturer of small-diameter square and rectangular tube, we utilize a roll-forming process to produce sections ranging from 10×10 mm to 60×60 mm, which are used for greenhouse arches, shelving units, and furniture frames. For a wall thickness of 0.8 mm, a 10% tolerance would result in a thickness less than that of the raw steel strip itself; therefore, we specify the minimum wall thickness rather than a percentage-based tolerance.
Small-diameter square and rectangular tubes—such as a 20×20 mm profile with a 1.2 mm wall thickness—present unique challenges due to their slender dimensions. Issues with these small-section tubes almost always stem from that 1.2 mm wall thickness: excessive welding current burns through the wall; tight bending radii cause wrinkling on the inner curve; and stacking loads can crush or deform the bottom layer. Furthermore, because negative wall-thickness tolerances are calculated as a percentage, the proportional loss of load-bearing capacity in a 0.8 mm wall is far greater than in a 100×100 mm tube.
Core Advantages
1. Lightweight Design & Reduced Structural Load:
With compact cross-sections and low self-weight, these small-diameter square and rectangular tubes serve as lightweight support components without adding excessive burden to the main structure. They are ideal for applications such as photovoltaic sub-frames, greenhouse frameworks, guardrails, and decorative frames; they reduce overall structural weight while maintaining necessary rigidity, facilitate transport and manual on-site handling, and lower costs by reducing the need for heavy hoisting equipment.
2. Excellent Processability & Versatility:
These tubes feature uniform forming and consistent quality at the ends and walls, making cutting, drilling, bending, and welding straightforward. They are compatible with various anti-corrosion surface treatments, such as hot-dip galvanizing, painting, and powder coating. They resist cracking and deformation during processing, ensuring ease of use for both factory-based cutting and on-site installation, and are well-suited for mass production of components.
3. Outstanding Cost-Performance Ratio & Effective Cost Control:
For projects requiring only light-to-medium load-bearing capacity, small-diameter square and rectangular tubes eliminate the steel waste associated with oversized specifications. They offer lower procurement costs than cold-drawn precision tubing and allow for precise load matching compared to large-specification straight-seam tubes, effectively controlling total steel procurement expenses while balancing performance requirements with budget constraints.
4. Flexible purchasing requirements; orders of all sizes accepted:
The small-diameter square and rectangular tubes are no strict minimum order quantities (MOQs); we cater to bulk procurement for greenhouse and guardrail projects, as well as material replenishment for processing plants, prototype production, and small-batch orders. Whether you are a general contractor, a small processing plant, or a construction firm, you can order according to your needs—even small-scale trial orders are fulfilled without issue.
Technical Specifications
Item
We Offer
Product
Small bore square & rectangular tubes, roll formed + high frequency welded
Forming Process
Flat steel strip formed through progressive roll stands, closed along one longitudinal seam
Square Tube Range
10×10 mm to 60×60 mm
Rectangular Tube Range
10×20 mm to 40×80 mm
Wall Thickness
0.5 mm to 2.5 mm; thickness below 0.8 mm subject to prior confirmation
Outer Corner Radius
Approx. 2t for standard rolls; ranges 1.5t to 3t depending on size and wall thickness
Wall Thickness Tolerance
In accordance with the specified standard of the order; our working limit for normal grade is ±10%, agreed minimum wall thickness is also available
Cut Length
Standard 6 m; 5.8 m, 12 m or cut to your cutting list available
Length Tolerance
Saw cut ±1.5 mm approx., cut face perpendicular to tube axis
Straightness
Camber ≤2 mm per meter and ≤0.15% of total length; no visible twist
End Face
Plain cut as standard; deburring upon request
Surface Finish
Black tube, oiled, pre-galvanized, hot-dip galvanized, powder coated
Coating
Tubes welded from galvanized strip: pre-galvanized Z120 to Z275 g/m²;Hot-dip galvanizing: average 45 microns for wall thickness below 1.5 mm, average 55 microns for 1.5–3 mm. These are minimum values specified in GB/T 13912-2020 for the two categories
Internal Weld Bead
As-welded condition by default. If bolt penetration or sleeving is required, please advise and we will confirm feasible solution per your specification
Packaging and Container Loading
Bundled Delivery:
Small-section tubes are shipped in hexagonal bundles, strapped with steel bands, and wrapped in rainproof film. For sea and rail transport, we place wooden pallets at the bottom—the most cost-effective protection against the crushing issues mentioned earlier.
Priced by Piece, Not by Ton:
Products in this size range are typically purchased by the piece or by the meter, so we quote and package them by the piece. We package according to the lifting capacity of your yard (i.e., how many pieces can be lifted in one bundle) rather than rounding to a specific weight.
Container Loading:
A 20-foot container can hold a large number of 6-meter fixed-length small-bore small-diameter square and rectangular tubes; the actual limiting factors are usually bundle shape and stacking height, not weight. Send us your specification list, and we will calculate the packaging plan and loading capacity before quoting sea freight costs.
Mixed Loading:
Different specifications can be combined in a single container; nesting smaller sizes inside larger ones saves space. Goods from other suppliers can also be delivered to our factory for consolidated loading (though storage fees may apply for large volumes).
Why Choose Shixinda?
Rollers Configured to Your Specifications:
The labor involved in changing forming rollers is the same regardless of whether the section is large or small, so some factories delay production of smaller sizes. We dedicate specific rolling schedules to this size range; repeat orders for the same size and wall thickness use the exact same roller setup as the initial order.
Documentation Included with Shipment:
Each bundle of small-diameter square and rectangular tubes comes with a material certificate detailing the heat number and the mechanical properties of the strip steel, along with our inspection records for dimensions and coating quality for that specific batch. Both records are filed by heat number, so even if an issue arises long after the container is unpacked, the specific coil of steel strip can still be traced.
FAQs
Q1: What is the size range for "small-bore" tubing?
Square tubes from 10×10 mm to 60×60 mm; rectangular tubes from 10×20 mm to 40×80 mm; wall thickness from 0.5 mm to 2.5 mm. Sizes smaller than this fall under instrument tubing (with tolerances measured in hundredths of a millimeter), while larger sizes are classified as structural hollow sections (subject to a different pricing structure). If your specifications fall near the boundaries, send us your drawings; we can clarify the classification before you spend time on a formal inquiry.
Q2: Can you cut to very short fixed lengths, such as under half a meter?
Yes, we can accommodate short-length cutting, though very short pieces may incur additional costs due to cutting waste.
Q3: Can you cut to length and deburr?
Yes. The sawing tolerance for length is approximately ±1.5 mm, with cuts made perpendicular to the axis; deburring is available upon request. Please send a specific cutting list rather than just the total length; we will quote based on material yield, as the proportion of offcuts is often the deciding factor in price comparisons for small-section tubing.
Q4: Can these be used as primary load-bearing columns?
Not recommended. Small-diameter square and rectangular tubes are better suited for light-duty auxiliary support; for primary load-bearing columns, we suggest using large-specification hot-rolled square or rectangular tubes.
Q5: How many pieces are in a bundle, and how many fit in a container?
We bundle based on the lifting capacity of your site's equipment rather than a fixed weight; you can specify the number of pieces per bundle when ordering. For a 20-foot container holding 6-meter lengths, thin-walled tubes allow for high volume; the loading limit is determined by bundle shape and stacking height, not weight. Send us your specification list, and we will provide a bundling plan and loading estimate.
Q6: Will there be issues with welding, bending, or drilling this tubing on our production line?
No, provided the parameters are set for this specific wall thickness rather than carried over from a job involving thicker material. Use low-current processes and spot welding instead of continuous welding; maintain a centerline bending radius of at least three times the cross-section's side length; use a backing support against the tube wall when drilling; and grind off the zinc coating before welding pre-galvanized material. We recommend bending and welding a sample first—we can send you one for free so you can fine-tune your parameters before your official order arrives.
If you have any enquiry about quotation or cooperation, please feel free to email us at yanglingling@shixindasteel.com or use the following inquiry form.Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy