Shixinda supplies ultra thin cold rolled precision steel strips, available for bulk coil procurement, custom slitting, and small-quantity sample orders. These cold-rolled steel strips feature high dimensional precision and a flat surface, effectively addressing common issues found in standard thin strips—such as significant thickness deviations, surface scratches, and inconsistent hardness. They are ideally suited for applications including precision stamping and the manufacturing of electronic components.
Ultra thin cold rolled precision steel strip is produced from hot-rolled steel strip through a series of processes, including multi-pass cold rolling, continuous annealing, finishing, and slitting. These ultra-thin strips feature a precision-ground surface that is clean and free from peeling or visible scratches, with hardness levels that can be precisely controlled. Serving as a fundamental raw material, they are used in precision stamping, bending, and forming to manufacture a wide range of small, high-precision metal components, meeting stringent customer requirements for dimensional accuracy, surface quality, and mechanical properties.
Key Product Advantages
1. Exceptional Dimensional Accuracy
Produced using precision cold-rolling mills equipped with in-line, closed-loop thickness control systems, these strips exhibit minimal thickness variation from one end of the coil to the other, with tolerances consistently maintained at the micron level. The slitting process ensures uniform and stable widths, with advanced edge-trimming techniques that keep burrs to an absolute minimum. This high level of dimensional consistency eliminates the need for frequent adjustments to tooling parameters during production. It reduces defects—such as tearing during stamping or parts falling outside of dimensional tolerances—minimizes raw material waste, and extends the service life of dies. These ultra thin cold rolled precision steel strips are ideally suited for automated production lines, including high-speed continuous progressive stamping and precision die-cutting.
2. Superior Surface Quality
Through multi-pass rolling and continuous finishing processes, the strips achieve a clean, flat surface, effectively minimizing defects such as peeling, indentations, scratches, and rust spots. Customers can choose between bright or matte finishes, with consistent surface roughness that enhances adhesion for subsequent processes like coating, electroplating, or bonding. This ensures a uniform appearance in the final product and eliminates the need for secondary operations—such as grinding or polishing—thereby saving both processing time and labor costs.
3. Flexible Slitting Capabilities
The strips can be slit to precise specifications based on technical drawings, with a minimum slit width of 5mm. This capability allows for the production of various narrow-width precision steel strips, perfectly suited for the manufacturing of small, high-precision components. The inner core diameter and coil weight can be customized to meet specific requirements. We offer the option of supplying smaller coils, which facilitates material changes on the customer’s production line and mitigates risks such as shape degradation or corrosion that can occur during the long-term storage of large-diameter coils.
4. High Material Purity
Our raw materials feature low impurity levels and minimal internal defects. After rolling, the strips exhibit excellent flatness, free from issues like warping or camber (lateral curvature). During continuous stamping processes, the material is less prone to strip breakage or tracking errors, which reduces the frequency of production line downtime for maintenance and enhances equipment utilization rates. With minimal performance variance between different batches, we ensure consistent and controllable quality for long-term, high-volume production, thereby guaranteeing the uniformity of the customer’s final products.
Technical Specifications
Item
We Offer
Product
Ultra Thin Cold Rolled Precision Steel Strip
Form
Steel coil, slit coil, or cut-to-length per your cutting list
Thickness
Ultra-thin range: 0.05 mm to 0.60 mm; thicker grades available up to 3.00 mm upon inquiry
Width
3 mm to 600 mm, slitted to custom width
Edge
Rolled edge, controlled-burr slit edge, deburred edge or rounded edge
Thickness Tolerance
Quoted by grade – Standard, Higher or Precision, subject to standard specified in order
Width Tolerance
Grade per the same standard, or tighter tolerance by separate agreement
Camber
Within grade limits corresponding to ordered width; tighter tolerance available upon agreement
Flatness
Coiling stress and transverse bending controlled within grade; tension-leveled steel strip available
Inspection, Documentation, and Loading
What we inspect:
Each coil of ultra thin cold rolled precision steel strip is verified against the material certificate for its specific heat (melt) number and the grade specified in the order. We measure thickness across the width, as well as at the head, middle, and tail sections along the coil length. We also check the slit width and camber; edge condition and burrs; surface quality (both on and beneath the protective film); oil film coverage; and coiling integrity—ensuring the inner diameter and coil weight are correct, and that the coil is wound tightly and squarely. These results are recorded for each individual coil, not just for the batch as a whole.
Documentation provided:
Each shipment includes the material certificate (quality certificate) for the specific heat number, along with our own detailed record of the actual dimensions and surface measurements for each individual coil. Both documents are indexed by the coil number, allowing us to provide answers even long after a container has been opened.
What we cannot do:
We do not test your specific dies, nor can we predict how your tooling will perform with material of a certain hardness—that can only be determined by running samples on your own press. We prefer to clarify this upfront rather than pretending that a certificate can provide all the answers.
Loading:
Ultra thin cold rolled precision steel strips are placed on wooden pallets inside the container. Depending on the height and width of the coils, they are loaded either horizontally (laid flat) or vertically (on edge). They are secured tightly to prevent any movement. Additionally, moisture-proof barriers are installed near the container doors, and protective edge guards are applied to the coils. Since these thin-gauge coils are very lightweight relative to their volume, the loading capacity is typically limited by the floor area of the container rather than by weight. Please provide us with the container type and the destination port; we will calculate an optimal loading plan before quoting the freight costs.
Why Choose Us
Shixinda has long specialized in the supply of steel raw materials. With stable upstream sourcing channels and ample inventory, we significantly mitigate the risk of supply disruptions caused by market volatility. We maintain a consistent stock of ultra thin cold rolled precision steel strips in various grades and specifications, ensuring rapid shipment for standard items. Our standardized production scheduling allows for the efficient breakdown of large-volume orders, ensuring continuous, phased deliveries. Should a client need to expand production or require urgent replenishment, we prioritize the allocation of existing stock and production capacity. We retain samples from every batch to ensure consistent performance, preventing quality fluctuations in your finished products that might otherwise arise from batch-to-batch material variations. Our long-term partnerships provide a reliable, steady supply of materials for your production needs.
FAQ
Q1: What is the minimum slit width for these cold-rolled steel strips?
A: These ultra thin cold rolled precision steel strips can be slit to a minimum width of 5mm. For narrow-width slitting, specific requirements regarding edge burrs should be confirmed.
Q2: Can the material surface be painted directly?
A: The bright surface finish is suitable for painting; however, we recommend degreasing beforehand, as heavy oil residue can impair coating adhesion.
Q3: How should I choose between "soft" (annealed) and "full-hard" steel strips?
A: Choose "soft" (annealed) strips for applications requiring bending or deep drawing; choose "full-hard" strips for parts that require high elasticity and resistance to deformation.
Q4: How long can the steel strips be stored before they rust?
A: When kept in their original anti-rust packaging within a dry environment, they can generally be stored for 3–6 months. We recommend using the material as soon as possible after the packaging is opened.
Q5: Can I request samples for testing?
A: Yes, we can provide small-coil samples. The cost of these samples can be negotiated as a credit toward future bulk orders.
Q6: What is the achievable tolerance for a 0.1mm thick steel strip?
A: For precision-grade steel strips with a thickness of 0.1mm, the tolerance can be controlled within ±0.005mm.
If you have any enquiry about quotation or cooperation, please feel free to email us at yanglingling@shixindasteel.com or use the following inquiry form.Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy