Products

The Zinc Aluminum Magnesium Solar Mounting Bracket manufactured by Shixinda suppliers is made of steel with a ternary alloy coating formed by adding approximately 1.5% to 3% aluminum and magnesium in the hot-dip galvanizing solution.

Shixinda, as a professional manufacturer of photovoltaic brackets, mainly produces high-quality Hot dip Galvanized Solar Mounting Brackets. These are the mainstream preferred matching products for ground photovoltaic power stations. The brackets are composed of carbon steel base material, hot-dip galvanized protective layer, and matching fasteners. The material selection strictly follows national standards. The main load-bearing components are made of Q355B high-strength steel, while the secondary components are made of Q235B carbon steel. The wall thickness is suitable for various engineering requirements, and the mechanical performance is stable and compliant.

The Solar Mounting Bracket manufactured by Shixinda's suppliers is made of Q355B high-strength material. It is available in three mainstream materials: hot-dip galvanizing, zinc-aluminum-magnesium, and 6063-T5 aluminum alloy. The thickness of the galvanizing layer is ≥ 85 μm. The salt spray test of the zinc-aluminum-magnesium model can reach 1500 hours. It has outstanding adaptability to high-corrosion environments such as coastal and saline-alkali areas, with a design service life of 25 years, matching the lifecycle of photovoltaic modules. The product strictly follows national load standards and can withstand 12-level strong winds and high snow loads, meeting 8-degree seismic design standards. The structural safety redundancy is sufficient.

Abstract: The Cold Rolled Steel Strip supplied by ShixinDa meets the procurement requirements of various international markets and can be delivered in compliance with international standards such as EN, JIS, and ASTM. The product range includes grades ranging from DC01 to DC06 and the SPCC series, suitable for commercial, stamping, and deep-drawing applications.

The Tin Plate manufactured by Shixinda's suppliers is made with cold-rolled low-carbon thin steel plates such as 08F and Q195BF as the base material. It undergoes double-sided electroplating with pure commercial tin with a purity greater than 99.8%. The base plate thickness ranges from 0.1 to 0.5 mm. This design integrates the strength of the steel and the corrosion resistance of the tin layer.

Shixinda's professionally designed China Embedded Steel Plate is an integrated metal load-bearing component pre-installed before concrete construction. It is composed of steel plate panels, threaded steel anchor bars, and anti-corrosion coatings, and includes various types such as flat plate and slot types, which are suitable for various pre-burial requirements in construction projects.