Products

Products

View as  
 
Hot Dip Zinc Solar Support Bracket

Hot Dip Zinc Solar Support Bracket

The Hot dip Zinc Solar Support Bracket manufactured by Shixinda is made of Q235B and Q355B high-strength steel, strictly following the GB/T13912-2020 national standards. It is fully immersed in molten zinc liquid to form a metallurgical bonding protective layer. The coating is uniform and has no dead corners. It can protect the base material by relying on the sacrificial anode principle and effectively resist outdoor wind and rain, industrial atmospheric corrosion. It can stably adapt to the 25-year design lifespan of photovoltaic power stations and requires minimal maintenance in the later stage.
Zinc Aluminum Magnesium Solar Mounting Bracket

Zinc Aluminum Magnesium Solar Mounting Bracket

The Zinc Aluminum Magnesium Solar Mounting Bracket manufactured by Shixinda suppliers is made of steel with a ternary alloy coating formed by adding approximately 1.5% to 3% aluminum and magnesium in the hot-dip galvanizing solution.
Hot dip Galvanized Solar Mounting Bracket

Hot dip Galvanized Solar Mounting Bracket

Shixinda, as a professional manufacturer of photovoltaic brackets, mainly produces high-quality Hot dip Galvanized Solar Mounting Brackets. These are the mainstream preferred matching products for ground photovoltaic power stations. The brackets are composed of carbon steel base material, hot-dip galvanized protective layer, and matching fasteners. The material selection strictly follows national standards. The main load-bearing components are made of Q355B high-strength steel, while the secondary components are made of Q235B carbon steel. The wall thickness is suitable for various engineering requirements, and the mechanical performance is stable and compliant.
Solar Mounting Bracket

Solar Mounting Bracket

The Solar Mounting Bracket manufactured by Shixinda's suppliers is made of Q355B high-strength material. It is available in three mainstream materials: hot-dip galvanizing, zinc-aluminum-magnesium, and 6063-T5 aluminum alloy. The thickness of the galvanizing layer is ≥ 85 μm. The salt spray test of the zinc-aluminum-magnesium model can reach 1500 hours. It has outstanding adaptability to high-corrosion environments such as coastal and saline-alkali areas, with a design service life of 25 years, matching the lifecycle of photovoltaic modules. The product strictly follows national load standards and can withstand 12-level strong winds and high snow loads, meeting 8-degree seismic design standards. The structural safety redundancy is sufficient.
Cold Rolled Steel Strip

Cold Rolled Steel Strip

Abstract: The Cold Rolled Steel Strip supplied by ShixinDa meets the procurement requirements of various international markets and can be delivered in compliance with international standards such as EN, JIS, and ASTM. The product range includes grades ranging from DC01 to DC06 and the SPCC series, suitable for commercial, stamping, and deep-drawing applications.
Tin Plate

Tin Plate

The Tin Plate manufactured by Shixinda's suppliers is made with cold-rolled low-carbon thin steel plates such as 08F and Q195BF as the base material. It undergoes double-sided electroplating with pure commercial tin with a purity greater than 99.8%. The base plate thickness ranges from 0.1 to 0.5 mm. This design integrates the strength of the steel and the corrosion resistance of the tin layer.
main-tit
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept